Garage Door Repair in Fort Worth, TX
Springs, cables, openers and new doors for Fort Worth homes, from 1950s neighborhoods near downtown and Camp Bowie to new streets around Alliance and the far south side. Tell us what the door does and we book the soonest visit.
- Spring and cable repair
- Opener repair and installation
- Doors on mid-1990s homes
- New garage doors
Garage door repair in Fort Worth from Emil Garage Doors covers broken springs, snapped cables, worn rollers, openers, remotes and sensors, plus new door installation. We serve Fort Worth from Alliance and the Basswood area in the far north to Altamesa Boulevard in the far south, and from Handley in the east to the west end of Camp Bowie Boulevard. Searching for garage door repair near me in Fort Worth, ZIP 76102? Call (214) 382-3772 and we book the soonest visit. See also garage door repair near me.
Services in this city
Spring and cable repair
Heavy-duty and standard springs, lift cables and drums.
Learn moreOpener service and installation
Belt-drive and wall-mount openers, installed and tested.
Learn moreDoor repair
Rollers, hinges, tracks, panels and sensors.
Learn moreCable repair
Snapped or slipped lift cables and damaged drums.
Learn moreNew doors
Wood-look, steel, glass and carriage-house styles.
Learn moreRemotes and keypads
Remotes, keypads, receivers and parts.
Learn more
Mid-century neighborhoods and miles of newer subdivisions
According to the Census Bureau's 2020-2024 American Community Survey, Fort Worth has about 374,000 housing units, about 65 percent of them single-family detached houses, and about 57 percent of occupied homes are owner-occupied. The median year built is 1994. About 34 percent of the housing stock went up before 1980 and about 43 percent in 2000 or later, so one visit may be a 1950s house near the core and the next a new house in the north.
The city is big and its districts differ. The Stockyards is a 98-acre National Register historic district, Ridglea Village was built from the early 1940s to the mid-1950s, and AllianceTexas in the north is a master-planned development by Hillwood. We could not verify which exterior rules apply to garage doors in historic areas or associations, so ask the city or your association before you change a door.
Tell us your cross street and whether the door is a single, a double or a pair, and we book the soonest visit. We weigh and balance each door before we pick new springs.
- Original springs and openers on older and mid-1990s homes
- Association rules in newer north and south subdivisions
- Historic areas: ask before changing a door
Fort Worth areas we serve
Fort Worth is made of many districts. We describe them by landmarks from public sources; call if yours is not listed.
| Part of Fort Worth | What is there | What we often see on garage doors |
|---|---|---|
| Stockyards and Northside | The Fort Worth Stockyards, a National Register historic district listed in 1976 | Older homes where parts are original; ask before changing a door in a historic area |
| Cultural District and Ridglea | The Kimbell Art Museum on Camp Bowie Boulevard and Ridglea Village, built in the 1940s and 1950s | Mid-century homes with original doors and openers |
| Hulen and the southwest | Hulen Mall at I-20 and Hulen Street and the streets around it | Mixed ages and door sizes |
| Alliance and the far north | AllianceTexas, a master-planned development, and Texas Motor Speedway | Newer subdivision doors and association rules |
Fort Worth shares some ZIP codes with neighbors such as Saginaw, Benbrook and Haltom City, so tell us your street address when you call.
What customers say
Real reviews from our Google listing, copied as the customers wrote them.
Emil is delightful, knowledgeable, professional, and capable. He promised to make the process easy and he did. From our first contact Thursday mid-day through completion of the project Saturday at Noon, everything was 100% perfect, and we are extremely happy. We are amazed when we look outside and see our beautiful new door, so soon after searching on google. Emil and his company deserve 100 stars but we are limited to only 5Dawn · Google review
It went very well, with the job being completed in three days. We waited few months for the supply chain to kick in ( Covid related delays ) and finally deliver the products. It was so worth the wait. Great installers, Emil and his team are professional and friendly, too, and patient in answering questions.Rachel · Google review
We interviewed several popular companies and we found that their quality, price, and level of professionalism is unmatched!Cory · Google review
Great tech. Responsive and really cared for our garage door. It’s very rare these days that someone care that much ! Thank you 😊Angela · Google review
Great. Arrived early in the morning with a team of 3 people. They worked steady and finished as it. got. Overall they did everything in a professional manner.Dj · Google review
Great company to use for garage door work. Came out promptly, over a weekend when I could not get others to respond. Efficient work, very knowledgeable, very friendly. I would not hesitate to contact them first the next time I need service.Courtney · Google review
5-Star Rated on Google · All customer reviews
What Fort Worth weather does to a garage door
Wikipedia's 1991-2020 normals for Fort Worth Meacham airport give a July mean daily high of 95.7 degrees and a January mean low of 35.3, with about 35 inches of precipitation a year. Long hot summers wear springs, cables and seals, and the opener motor works harder in the afternoon heat.
The Mayfest storm of May 5, 1995 dropped hail from 1.75 to 4.5 inches across the Fort Worth area, with about $2 billion in damage, according to Wikipedia. An F3 tornado hit downtown on March 28, 2000. DFW Airport reached minus 2 degrees on February 16, 2021, and rolling blackouts from ERCOT left millions of Texans without power. Hail dents panels, wind can bend tracks, and a power cut means you need to know where your manual release is.
Twice a year, wipe the tracks, put lubricant on the rollers and hinges, and test the safety reverse. After hail or a storm, look for dented panels and bent track sections before you run the opener.
- Lubricate rollers and hinges twice a year
- Check panels and tracks after hail or wind
- Know where the manual release is
Garage doors we service in and near Fort Worth
Home styles from the neighborhood and the communities next door. Click a photo to enlarge.
From your call to a working door
Tell us what the door does
Call or send the form with your neighborhood, what you hear and whether the door moves.
We inspect the whole door
Springs, cables, rollers, tracks, hinges, sensors and the opener, so a second worn part does not surprise you later.
You get the price first
We explain what failed, what we recommend and what it costs before we start.
Repair, balance and test
We balance the door, run full cycles and test the safety reverse before we leave.
Opener safety, permits and design rules in Fort Worth
Safety reverse and sensors. A home garage door opener sold in the United States has to reverse the door on contact and have photo-eye sensors or an equivalent entrapment protection device, under the federal Consumer Product Safety Commission standard (16 CFR part 1211). A door that closes on an object, or an opener with dead sensors, needs repair before further use. See opener installation.
Associations. Check any HOA or historic district rules before you order a new door, and see new garage doors for style options.
City permits. Fort Worth is its own city, so its rules come from the City of Fort Worth. Development Services is at City Hall, 100 Fort Worth Trail, phone 817-392-2222, and the permits page is at fortworthtexas.gov. The city also runs a Residential Permit Guide that shows which permits a project needs. We found no city page that says whether a garage door or opener replacement needs a permit, and we could not confirm whether garage door contractors must register with the city. Check with Development Services before the work.
State rules. We found no Texas statewide license for garage door contractors. A Texas Department of Public Safety page says installing garage door or gate openers needs a Private Security license only if the opener is connected to an alarm system or monitors or logs who comes and goes. The Stockyards is a National Register historic district; we could not verify any local rule on garage doors there.
Prices in Fort Worth
| Service | Price | What affects it |
|---|---|---|
| 12-point safety inspection | $89 | Springs, cables, rollers, tracks, sensors and opener checked |
| Torsion spring pair, standard two-car door (10,000 cycle) | $250 to $450 | Door weight and size |
| Heavy-duty torsion springs (25,000+ cycle, heavy, wood or oversized doors) | $350 to $900 | Door weight, spring wire size and cycle rating |
| Lift cable replacement, pair | $175 to $350 | Door weight and cable length |
| Belt-drive opener with battery backup, installed | $550 to $900 | Horsepower, smart features, door size |
| Wall-mount (jackshaft) opener, installed | $900 to $1,400 | Door size, headroom and wiring |
| Insulated steel garage door, 16x7, installed | $1,800 to $3,600 | Short or long panel, windows and color |
| Full-view aluminum and glass door, 16x7, installed | $4,500 to $9,000 | Glass type and frame color |
Prices reviewed November 2026. Final price is confirmed after we see the problem.
Also serving near Fort Worth
Fort Worth surrounds or nearly surrounds several small cities, including Saginaw, Blue Mound, Benbrook, White Settlement, Lake Worth and Haslet, according to Wikipedia. The cities and neighborhoods below are our closest pages.
Fort Worth garage door repair: questions we hear
Is there garage door repair near me in Fort Worth?
Yes. Emil Garage Doors repairs garage doors in Fort Worth (ZIP 76102) and the neighborhoods next door. Call (214) 382-3772, tell us your street or neighborhood and what the door does, and we book the soonest visit. See garage door repair near me.
What is the average price to repair a garage door in Fort Worth?
Typical prices: a 12-point safety inspection is $89, a torsion spring pair for a standard two-car door is $250 to $450 (heavy-duty springs $350 to $900), a cable pair is $175 to $350, and a belt-drive opener installed with battery backup is $550 to $900. The final price is confirmed after we see the door.
What is the most common garage door repair in Fort Worth?
Broken torsion springs are among the most common garage door repairs, because springs wear out after a set number of open-and-close cycles. Cables, rollers, safety sensors and off-track doors follow. See garage door spring repair.
How much is a service call for a garage door?
Our 12-point safety inspection is $89. It covers the springs, cables, rollers, tracks, sensors and opener, and we explain what we find before any repair starts.
Is it cheaper to repair or replace a garage door?
A repair is usually cheaper when the door itself is sound and only a spring, cable, roller or sensor failed. Replacement makes sense when panels are bent or rotted, the door is very old or the opening needs a different size. We tell you which one fits before we start.
Which ZIP codes do you serve in Fort Worth?
Fort Worth's street ZIP codes include 76102 through 76112, 76114 through 76120, 76123, 76126, 76127, 76131 through 76135, 76137, 76140, 76148, 76155, 76164, 76177, 76179, 76180, 76182 and 76244. Several are shared with nearby cities, so call us if you are not sure we reach your address.
Do you service garage doors in Alliance and the far north of Fort Worth?
Yes. Alliance is a master-planned development in the north of the city. Homes there are newer, and many belong to associations with rules on door style and color, so check your association's rules before you choose a new door and tell us when you call.
Do you repair garage doors after hail in Fort Worth?
Yes. Hail can dent steel panels and strong wind can bend tracks or push a door out of its frame. We inspect the panels, track, springs and opener, explain what we find and quote the price before we start.
Can a handyman fix a garage door?
A handyman can handle a sensor or a roller. Springs and cables are under high tension and need a trained technician, so we do not recommend fixing them yourself.
How do I test my garage door's safety reverse and sensors?
Close the door with the opener, then lay a 2x4 flat on the floor in the door's path. The door should touch it and reverse. For the sensors, start the door closing and pass a broom handle through the beam near the floor. The door should stop and go back up. If either test fails, stop using the automatic close and call us for a repair.
Helpful garage door guides for Fort Worth homeowners
- Garage Door Opener in a Hot Texas Garage If your garage door opener stops partway or runs slowly on hot afternoons, check the door, sensors and settings first. Here is a plain checklist.
- Texas HOA and City Rules for Replacing a Garage Door Do you need a city permit or HOA approval to replace a garage door in Texas? What the rules say, what the HOA denial process looks like and who to ask first.
- Garage Doors in San Antonio : Hail Season and Checks San Antonio garage doors face hail, wind and spring storms. Learn what the weather service says, what to check after a storm and how to pick an insulated door.
Garage door acting up in Fort Worth?
Call now or send your details. We book the soonest visit for your neighborhood.