With us, a garage door tune-up (rollers, sensors and adjustments) is $150 to $350, and a 12-point safety inspection is $89. Clopay recommends a professional inspection once a year. A yearly visit is most worthwhile for an older, heavy or daily-use door, because it finds worn springs, cables and rollers before they fail.
What a tune-up costs
These are our typical prices for the visits people ask about, with the two most common parts a visit turns up. The final price is confirmed after we see the door and before we start.
| Service | Price | What affects it |
|---|---|---|
| 12-point safety inspection | $89 | Springs, cables, rollers, tracks, sensors and opener checked |
| Rollers (set), sensors or tune-up | $150 to $350 | Number of rollers, sensor type and door size |
| Torsion spring pair, standard two-car door (10,000 cycle) | $250 to $450 | Door weight and size |
| Lift cable replacement, pair | $175 to $350 | Door weight and cable length |
Prices reviewed November 2026. Final price is confirmed after we see the door.
What a tune-up includes
Clopay describes a tune-up inspection as a careful check of every moving part. A good visit covers the same ground:
- Panels, springs, cables, rollers, hinges and tracks checked for wear, rust or fraying
- Hinges, rollers and springs lubricated to cut friction
- Spring tension, alignment and opener force checked
- Auto-reverse and photo-eye sensors tested
- Nuts, bolts and brackets checked and tightened
Spring and cable checks are technician work. DASMA, the garage door industry association, tells owners not to repair or adjust the door themselves.
Is a yearly service worth it?
Often, yes, for these reasons. Clopay recommends that you have your garage door professionally inspected annually. Parts wear on a schedule: a standard torsion spring is rated for 10,000 cycles, and higher-cycle springs are rated for about 100,000, according to Plano Overhead Door. A technician can see how worn a spring, cable or roller is before it breaks.
A yearly visit pays off when
- The door is older or heavy
- It opens and closes several times a day
- It is noisy, slow or shaky
- No one has looked at the springs and cables in years
You can wait when
- The door is new and works smoothly
- It is used a few times a week
- The monthly checks below all pass
- You still book a visit if anything changes
What you can check yourself each month
A visit does not replace your own monthly look. Watch and listen as the door runs, wipe the photo-eye lenses and keep the tracks clear. Overhead Door suggests a monthly balance check by lifting the door halfway by hand: if it slips or snaps open, the springs may be unbalanced. Our post on safety tests walks through the balance, auto-reverse and photo-eye checks, and the maintenance checklist covers the rest.
Clopay warns that bottom brackets are under extreme tension and can cause serious injury. If the door is heavy, crooked or off track, stop using it and call a technician.
Quick answers
Is a professional garage door tune-up worth it?
For an older, heavy or busy door, yes. Clopay recommends a professional inspection once a year, and the visit finds worn springs, cables and rollers before they fail.
How much does a garage door tune-up cost?
With us, a tune-up covering rollers, sensors and adjustments is $150 to $350. The final price is confirmed after we see the door.
How much is a garage door inspection?
Our 12-point safety inspection is $89. It covers the springs, cables, rollers, tracks, sensors and opener.
What does a garage door tune-up include?
Clopay lists inspection of the panels, springs, cables, rollers, hinges and tracks, lubrication, spring tension and opener force checks, safety sensor tests and tightening of hardware.
When a tune-up is not enough
A tune-up adjusts and lubricates. It does not fix a broken part. If the visit finds a snapped cable, a broken spring or a door off its track, the repair is priced separately, using the lines in the table. See spring repair and cable repair. A tune-up on a door with a worn part is still useful, because you learn about it before the door stops working at the worst moment.
What a tune-up quote should say
- What is checked, in a list you can read
- Which parts are included and which are extra
- Whether repairs found on the visit are quoted before work starts
- The total price for the visit
Our 12-point safety inspection is a good first step when you are not sure what the door needs.
Book a visit
Emil Garage Doors services garage doors across Southern California, and our city pages cover California, for example Hemet, Compton and Sacramento. Call (213) 340-4232 or send the estimate form with your door age and what it has been doing, and we will tell you which visit fits.
Our related services
City pages near you
We repair and install in these cities. Each page has local notes, prices and reviews.
Read next
Sources
- Clopay: garage door maintenance service (what a tune-up inspection covers)
- Clopay buying guide: garage door safety (professional inspection once a year, springs, cables, brackets)
- DASMA: updated checklist for inspections of sectional doors and electric operators (do not repair or adjust the door yourself)
- Plano Overhead Door: understanding the cycle life of your garage door torsion spring
- Overhead Door: garage door opener lifespan and signs to replace