Electric Gate Repair in Culver City, CA
Operators, sensors, hinges, rollers and keypads for Culver City gates, from Blair Hills to Fox Hills. Describe what the gate does and we book the earliest visit we can.
- Swing and sliding gate repair
- Operators, sensors and batteries
- Keypads, remotes and access control
- Garage doors at the same visit
Electric gate repair in Culver City and gate repair in Culver City from Emil Garage Doors cover swing and sliding gates, hinges, tracks, rollers, operators, control boards, sensors, remotes, keypads and backup batteries. We serve Culver City from the streets around the downtown Culver Hotel and City Hall on Culver Boulevard to Blair Hills in the east and Fox Hills in the south, at houses, townhomes and apartment buildings. Searching for gate repair near me or electric gate repair near me in Culver City, ZIP codes 90230 and 90232? Call (213) 340-4232, tell us what the gate does and we book the soonest visit. See gate repair near me. For the garage, see garage door repair in Culver City.
Services in this city
Operators and boards
Electric gate repair for operators, boards, sensors and batteries.
Learn moreHinges, tracks and frames
Gate repair for the structure that the operator pushes.
Learn moreEntry control
Access control: keypads, card readers and intercoms.
Learn moreRemotes and receivers
Remotes, receivers and replacement parts.
Learn moreGarage doors too
Springs, cables, rollers, tracks and sensors on garage doors.
Learn moreGarage door openers
Belt-drive and wall-mount openers with battery backup.
Learn more
Mid-century houses, hillside streets and townhomes
According to the Census Bureau's 2020-2024 American Community Survey estimates, the median Culver City home was built in 1963, about 84 percent of housing units predate 1980 and about 55 percent of occupied homes are owner-occupied. About 36 percent of units are single-family detached houses, about 9 percent are attached homes such as townhomes, and about 28 percent are in buildings of 20 or more units.
Wikipedia lists 15 neighborhoods recognized by the city. Local real-estate sources describe Blair Hills as winding hillside streets with mid-century and newer homes, and Fox Hills as an area annexed in 1964 with 1970s apartments, condos and a mall. We could not confirm any gated or HOA communities in Culver City, so check with your own association before you change a gate.
On a gate at a mid-century house, a townhome entry or a shared apartment garage, we start with the gate and its hardware, then test the operator, the sensors, the keypad and the backup battery.
- Driveway gates at houses from the mid-century decades
- Shared gates at townhomes and apartments
- Gates on sloped driveways in hillside streets
Why gates in Culver City stop working
These are the faults we hear about most. The real cause is confirmed on site.
| Symptom | Common cause | What we do |
|---|---|---|
| Gate stuck open or stuck closed | A failed operator, a locked manual release or a power fault | Use the manual release as the maker directs, then diagnose the operator |
| Gate reverses without touching anything | Dirty photo eyes, a bent bracket or a force setting that is too low | Clean and realign the photo eyes and reset the force |
| Gate swings or slides unevenly | A leaf out of level, worn hinges or a loose track | Level the leaf, replace hinges, tighten the track |
| Clicking sound but no movement | A weak battery or a failed starting capacitor | Test the battery and the capacitor and replace the weak one |
| Solar gate stops after a few cycles | A weak panel, an old battery or shade on the panel | Test the panel and the battery, clean or move the panel |
| Remote or keypad gives no response | Dead batteries, a lost code or a receiver fault | Replace batteries, reprogram the code, test the receiver |
Do not run an operator against a gate that is jammed or dragging.
What Culver City conditions do to a gate
Wikipedia's 1991-2020 climate table lists average daily highs of 78.0 degrees in July, 79.1 in August and 78.4 in September, about 14 inches of rain a year and a record high of 111 degrees in September. Mild summers are easier on batteries than desert heat, but the record shows that heat spikes happen, and winter rain can reach keypads and control boxes.
The Culver City Fire Department's April 2025 bulletin says part of Blair Hills is mapped Very High Fire Hazard Severity, and Ballona Creek runs through the city to Santa Monica Bay; we could not confirm any flood history. ABC7 reported widespread outages across Los Angeles County during the January 2025 Santa Ana event, but we found no Culver City figure. A gate on a sloped driveway also needs its operator and brakes to hold, and an electric gate needs a healthy backup battery for outages.
Once a year, test the backup battery, check the hinges or track and wipe the sensor lenses.
- Test backup batteries before fire and wind season
- Check that a gate on a slope holds when released
- Check keypads and control boxes for water after rain
Gates we service in and near Culver City
Gate styles from the neighborhood and the communities next door. Click a photo to enlarge.
What customers say
Real reviews from our Google listing, copied as the customers wrote them.
It went very well, with the job being completed in three days. We waited few months for the supply chain to kick in ( Covid related delays ) and finally deliver the products. It was so worth the wait. Great installers, Emil and his team are professional and friendly, too, and patient in answering questions.Rachel · Google review
We interviewed several popular companies and we found that their quality, price, and level of professionalism is unmatched!Cory · Google review
Great tech. Responsive and really cared for our garage door. It’s very rare these days that someone care that much ! Thank you 😊Angela · Google review
Great. Arrived early in the morning with a team of 3 people. They worked steady and finished as it. got. Overall they did everything in a professional manner.Dj · Google review
Great company to use for garage door work. Came out promptly, over a weekend when I could not get others to respond. Efficient work, very knowledgeable, very friendly. I would not hesitate to contact them first the next time I need service.Courtney · Google review
Incredible honest work. Emil took care of all the repairs needed in order for my garage door to work again. I know I need a new garage door but I can't afford it right now this company was nice enough to fix it instead of hounding me for more money to get a new door. Emil was so nice that he even provided me a price. I was so happy he said I could call him when I had the money and he would honor me the price. amazing company to reach out to.Jasmine · Google review
5-Star Rated on Google · Read all our reviews on Google · All customer reviews
From your call to a working gate
Tell us about the gate
Swing or sliding, manual or automatic, the brand if you know it, and what the gate does.
We check the gate before the motor
A gate that drags overloads the operator, so we look at hinges, posts, tracks and wheels first.
You get the price first
We explain what failed, what we recommend and what it costs before we start.
We repair and test every safety device
We run the full cycle and test the latch, the sensors and the auto-reverse before we leave.
What to check, and what to leave alone
Most gate problems have a simple first check: is there power, is the battery charged and is anything in the path or in front of a sensor? Check those before you call, and leave everything else alone.
Springs are not the issue on a gate, but motors, chains and moving leaves can still pinch and crush. Keep hands out of hinges, tracks and drive parts.
- Check the outlet, breaker and battery
- Clear leaves, dirt and objects from the path and the sensors
- Leave the control board and wiring to us
Permits, HOAs and emergency access in Culver City
City permits. Culver City's Building Safety Division is at City Hall, 9770 Culver Boulevard, second floor, (310) 253-5800, open weekdays 7:30 a.m. to 5:30 p.m. and closed alternating Fridays, with an online permit portal; see culvercity.gov. The city's list of required permits names a garage door opener only if an outlet or wiring is added, and it does not name gates or gate operators, so we could not confirm a gate-specific rule. Call the division before a new gate or new electrical work.
Fire zone and historic districts. The Culver City Fire Department's April 2025 bulletin recommended keeping the Very High boundaries, primarily the Blair Hills neighborhood. The city's Historic Preservation Program lists three designated districts, on Braddock Drive, Lafayette Place and McConnell Boulevard, and exterior changes to landmark or significant structures may need city review.
Fire department access. A locked gate can slow emergency crews. Ask the local fire department what it requires, for example a key switch or Knox box, before you install or change an entry.
Design rules. Planned communities and HOAs can limit gate style, height and color. Ask first, and we can give you a written scope for their review.
Entrapment protection. The UL 325 standard covers automatic gate operators and calls for devices such as photo eyes or contact edges. We test these devices every time we repair an operator.
Also serving near Culver City
Culver City is mostly surrounded by Los Angeles neighborhoods, including Mar Vista and Palms to the north, Westchester to the south and Mid-City to the east, with Santa Monica, Beverly Hills and Inglewood nearby. The pages below are our closest gate repair pages. Need help now? See gate repair near me, electric gate repair, gate repair or garage door repair near me.
Culver City gate repair: questions we hear
Is there gate repair near me in Culver City?
Yes. Emil Garage Doors repairs swing and sliding driveway gates in Culver City (ZIP codes 90230 and 90232) and the neighborhoods next door. Call (213) 340-4232, tell us your street or neighborhood, the gate type and what it does, and we book the soonest visit. See gate repair near me.
Is there electric gate repair near me in Culver City?
Yes. Electric gate repair near me in Culver City means a technician who repairs the operator, control board, sensors, remotes and backup battery as well as the gate itself. Call (213) 340-4232 and we book the soonest visit. See electric gate repair.
What is the difference between gate repair and electric gate repair in Culver City?
Gate repair means the gate itself: hinges, posts, latches, wheels, tracks and frames. Electric gate repair means the parts that move it: the operator, control board, sensors, remotes, keypads and battery. Most service calls need both checked, so we start with the gate and then test the electronics. See gate repair.
Why does my electric gate hum but not open?
Hum without movement points to a binding gate or a failed capacitor, gear or arm. Keep the operator off, and we free the gate and test the parts.
How much does gate repair cost in Culver City?
A sensor, remote or hinge costs far less than an operator or a rebuilt post. We quote after we see the problem and before we start, so you know the price first.
My gate does not work during a power outage. What can I do?
Most operators have a manual release, and many can use a backup battery. Use the release as the manufacturer directs and call us. We test the battery and the control board, because a flat battery or a board that lost its settings after an outage is common.
Should electric gates be serviced?
Yes. A yearly check of the battery, sensors, hinges or track, and operator keeps a gate from failing at a bad time.
Can you repair a gate operator from any brand?
We repair most residential operators. Tell us the brand and model, or send a photo of the unit. If parts are no longer made we explain your options.
Which ZIP codes do you serve in Culver City?
The street ZIP codes are 90230 and 90232; 90231 is for PO boxes. ZIP 90066 is the Mar Vista postal area of Los Angeles. ZIP codes cross city lines, so call us with your address if you are not sure we reach you.
Do you serve Blair Hills and Fox Hills?
Yes. We repair gates in Blair Hills, Fox Hills and the rest of Culver City. A gate on a sloped Blair Hills driveway can drift on its track or hinges, and a Fox Hills building entry may be shared, so we check the gate frame, the controls and the safety devices.
Does Culver City have a rule about fences and gates?
Culver City's list of required permits says all fences and walls need Planning Division approval regardless of height, with block walls under 3 feet 6 inches and wood or vinyl fences under 7 feet exempt from a Building Safety permit. The list does not address gates, so ask the city.
Can a handyman fix a gate?
A handyman can handle a loose latch or a dead remote battery. A failed operator, a control board or a gate that has dropped off its hinges needs a technician who can test the controls and the safety devices.
Do you repair garage doors in Culver City too?
Yes. See garage door repair in Culver City for springs, cables, openers and new doors, and garage door repair near me. When you ask for both we can look at the gate and the garage door at the same address.
Helpful electric gate guides for Culver City homeowners
- Driveway Gate Permit and Fire Access Rules in California Do you need a permit for an electric driveway gate? See what the state code says, why cities differ and how Knox boxes and key switches work for fire access.
- Access Control for Gates: Keypads, Card Readers and Receivers How gate access control works: keypads, card readers and fobs, radio receivers, intercoms and loops. What each does and what to ask before you buy.
- Gate Safety Sensors and UL 325 : What They Are and Why They Matter UL 325 is the safety standard for gate operators. See what photo eyes, edge sensors and built-in sensing do, how many you need and why not to bypass them.
Gate stuck or not opening in Culver City?
Call now or send your details. We book the soonest visit for your neighborhood.